Olympus Motor Drive 2 Uživatelský manuál

Operating the Motor Drive 2 with the OIM-4

Loading the Film1.2.10

3.4 . Press the shutter release.The film will automatically advance two frameswithout taking pictures.The film advance release wilt automatically stop

Rewinding the Film1 . Push R button.Turn the lever until it stops.When rewinding is completed, the motor will auto-matically stop.12

3.4 . Remove the film.13

Operating the Motor Drive 2 with the OM-20 (OM-G) or OM-30 (OM-F)14

Loading the Film15

3.4. Press the shutter release.The film wil I automatically advance two frameswithout taking pictures.The film advance release will automatically stop

Rewind until the tension is released.17Rewinding the Film2.

3.18

Operating the Motor Drive 2 with the OM-2N (OM-1N)19

Loading the Film1.2.20

214 . Make two blind shots.3.

Set the exposure counter to "36"The film advance release will automatically stop.225 . Push the reset button.Press the shutter release.

Rewinding the Film1.2.Rewind until the tension is released.23

3.4 . Push the reset button.24

26Using films that are not a 36-exposure roll.How to prevent automatic stop

How to illuminate the exposure counterAttaching the Remote ControllerM. Quartz Remote Controller 127

Attaching the strapAttaching the 250 Film Back 128

Symbols used in this manualCorrect Incorrect Operation Operation orderTwo-step operationAutomaticoperation OrderAttention Lamp on

Care and Storage29Questions and AnswersQ: I have pressed the camera's shutter release.A: If you then press the shutter release button ofthe Motor

Description of Controls1 Shutter Release Button2 Remote Control Jack10 Setting Button11 Reset Button12 Illumination Button3 Shutter Release Coupling P

SpecificationsCompatible cameras: OM-4, OM-2, OM-1, OM-30(OM-F), OM-20 (OM-G).Film advance: 5 frames per second maximum con-tinuous filming without mi

OLYMPUS OPTICAL CO.,LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan Tel 03-340-2211OLYMPUS CORPORATIONCrossways Park, Woo

PREPARATIONAs the power unit, the M. 15V Ni-Cd Control Pack 1 is illustrated.

Inserting the Batteries"36" turns on.4LR44/SR44

Connecting the Power UnitAttaching to the Camera1 . Remove the motor drive socket cap.5

2 . Store the removed cap.3 . Turn the fastening screw clockwise.* The cap of OM-1 or OM-2 cannot be stored.* If there is clearance, shake the motor d

74. Set the mode selector to SINGLE or SEQUENCE. 1 . Set the mode selector to OFF.Detaching the Motor Drive

* The motor cover should always be attached if youare not shooting with the motor drive.2.3.